All work on your vehicle is carried out at
Our offerings also include partial vehicle restoration, or engine and/or transmission restoration.
The specialists at the
In the following overview, we would like to illustrate the individual steps using a complete restoration as an example.
Do not hesitate to contact us. We look forward to getting to know you and your classic
*The hourly rates stated above are based exclusively on services rendered by the
We look forward to talking to you personally to agree the specific details.
1. Cost estimate
Approximation: Based on photos,
2. Vehicle delivery
Review of the situation: Experts and the customer meticulously examine the vehicle. On-site in Stuttgart, the scope of the required work is discussed and defined.
For a full restoration, the vehicle is completely disassembled and all parts are removed from the bodyshell, from the engine to the interior equipment. Craftsmanship throughout: After our specialists have removed the worst corrosion from the bodyshell, they open all the cavities – a necessary step in preparation for the paint removal bath. After the paint removal bath, the condition of the classic vehicle can be clearly determined. If necessary, the initial rough cost estimate will be specified.
4. Engine & transmission
To ensure everything runs smoothly, the function and authenticity of the engine and transmission must be carefully checked. If necessary, they are completely disassembled and cleaned. Defective parts are replaced with genuine parts or parts that were replicated based on original drawings. The original measurement values specified by the factory are used as the basis for the engine settings. Its performance is then measured during a test run on the test stand. The results are documented and displayed in a diagram. In this way, the engine and transmission are restored to their original state – both visually and technically.
The frame is precisely aligned on the straightening bench, using frame gauges for the doors and windows that originate back to the production of what is now a classic. If necessary, experienced mechanics reshape deformed areas. Extremely corroded areas are cut out of the body and replaced with new genuine parts. The "trial assembly" that follows is also a painstaking process. The untreated body is completely assembled on the straightening bench. Gap dimensions and functions (such as shutting of the doors and the engine and luggage compartment lid) are checked and adjusted to the optimum setting. The parts are then removed once more so that they can undergo further professional treatment.
6. CDPB and paint finish
Protection and beauty: The classic vehicle has never had it so good, even when it was brand new. Today, the bodyshell gets treated to a cathodic dip painting bath. The CDPB ensures that the primer is evenly applied down to the very last cavity. Epoxy resin dissolved in water produces a conductive paint. When an anode is immersed in the bath, the bodyshell acts as a cathode, generating a direct current. This causes paint particles to adhere evenly and securely to the body and to all cavities, providing a high degree of corrosion protection. The complete paint build-up in the original colour now begins.
Where you feel at home: The experts are now ready to openly discuss matters of pure taste. The interior – an affair of the heart. Specialists can treat the interior or completely renovate it using materials of the same high quality as the original materials. Here, your imagination can continue to soar with few boundaries. Our experts will satisfy almost every desire.
Roadworthy: Your classic
9. Documentation for the customer
On handover, the customer receives not only his valuable companion once more, but also a high-quality restoration box, including a book containing the complete documentation of the work on his vehicle, a USB-Stick with approx. 1,000 photos and a certificate including a badge. Everything in this box reminds you of your classic