. After a construction period of less than 48 months,
Production of the first customer vehicles will begin as scheduled on 9 September 2019. Assembly will take place in a “factory of the future” – flexible, networked and using 4.0 production technology. It is a further step towards the “Zero Impact Factory” with no negative environmental impact: production of the
The construction project included several individual subprojects, each itself with considerable scope. The result was a body shop, a paint shop, a plant for the production of electric motors and components, a vehicle assembly hall and the connecting transport technology. A total of 35,000 tonnes of steel were used for the new production facility – as much as for 140,000
Start of construction at the end of 2015
The positive response to the motor show presentation of the
Preparation of the construction work alone required 21 individual preliminary projects and more than 5,000 employee relocations. This also included the excavation pit for the multi-storey assembly building located on a slope: since its height is limited to 38 metres so as not to impair the flow of fresh air to Stuttgart city centre from the north, the pit is 25 metres deep. 240,000 cubic meters of earth were moved for this purpose.
A new factory inside a factory
“We’ve built a factory inside a factory – in the middle of the city and close to our neighbours, in the most confined of spaces, in the shortest possible time and without disrupting the existing sports car production facility running at full capacity. Now the factory has been completed on schedule and without any major setbacks,” says Albrecht Reimold. “This was possible due to meticulous planning and an excellent team.” A total of 130 companies and suppliers were part of that team. One of the logistical masterpieces was coordinating the construction site traffic without impairing the significant regular flow at the plant. “Close dialogue with our neighbours was also crucial,” says Reimold. “We kept them fully up-to-date on developments throughout the entire course of the project.”
Some more figures: 10,000 construction site passes were issued, 530 construction site containers and three kilometres of site fencing were erected, and 35 kilometres of site power cables were laid, including power for the 1,000 linear luminaires distributed throughout the construction sites. Four kilometres of new road were also built within the plant.
Further information, film and photo material in the
© 2019 All rights reserved to
* Data determined in accordance with the measurement method required by law. Since 01 September 2018 all new cars are approved in accordance with the Worldwide Harmonized Light Vehicles Test Procedure (WLTP). You can find more information on WLTP at www.porsche.com/wltp. From 01 January 2019, all fuel consumption figures are shown as determined in accordance with WLTP. CO₂ figures will be shown as NEDC-equivalent values, as CO₂ based taxation will continue to be based on an NEDC value (derived from WLTP) until 06 April 2020. For Plug-in Hybrid Electric Vehicle (PHEV) range and Equivalent All Electric Range (EAER) figures are determined with the battery fully charged, using a combination of both battery power and fuel.
Values are provided for comparison only. To the extent that fuel and energy consumption or CO₂ values are given as ranges, these do not relate to a single, individual car and do not constitute part of the offer. Optional features and accessories can change relevant vehicle parameters such as weight, rolling resistance and aerodynamics which may result in a change in fuel or energy consumption and CO₂ values. Vehicle loading, topography, weather and traffic conditions, as well as individual driving styles, can all affect the actual fuel consumption, energy consumption, electrical range, and CO₂ emissions of a car.
** Important information about the all-electric