Discover the 718 Spyder model in detail.
You already know the highlights. Here are more details about the individual chapters.
Aerodynamics and design
Discover more about aerodynamics and design.open chapter
Discover the performance.open chapter
Interior and infotainment
Discover the interior and infotainment.open chapter
Let's face it, you'll barely ever want to close it: the partially electric and high-speed compatible, lightweight hood of the 718 Spyder. It can be opened and closed with ease and enhances the presence of the 718 Spyder even when closed.
Wheels and tyres.
painted in silver colour
painted in satin platinum,
painted in satin black,
painted in satin Aurum,
Information about wheels can be found here.
6-speed manual transmission.
The torque transmission in the 718 Spyder is achieved by the precise 6-speed manual transmission with dual-mass flywheel, optimally designed for power. The movements of the gear stick is crisp and short. The driving experience is especially active, intense and pure. The dynamic throttle-blip function plays its part in keeping you, and your endorphin levels, busy.
For the 718 Spyder, the optionally available PDK is even more performance focused. The GT-specific gear selector, short shift times and short, succinct gear changes via the shift paddles as well as a sporty seventh gear, offer a convincing shift performance. Manual operation of the gear selector is based on the established motorsport principle – pull back to shift up, forwards to shift down.
In short: PTV improves the driving dynamics. In detail: the integrated mechanical rear differential lock enables higher traction and lateral dynamics as well as significantly improved vehicle stability during load changes in corners and when changing lane. In addition, when the car is driven assertively into a corner, brake pressure is applied to the inside rear wheel. Consequently, a greater amount of drive torque is distributed to the outside rear wheel, almost pulling the car into the corner. Steering response is improved, agility is increased.
GT sports suspension.
Porsche Active Suspension Management (PASM -30 mm).
This electronic adjustment of the shock absorber system actively and continuously adjusts the damping force on each wheel, based on current road conditions and driving style. PASM has two settings: 'Normal', which is a blend of performance and comfort, and 'Sport' where the set-up is much firmer.
Dynamic transmission mounts.
This electronically regulated system minimises perceptible oscillations and the vibration of the entire drivetrain, in particular the engine. It also adjusts the damping force and stiffness to the driving style and road surface conditions. The results are greater and more uniform drive force, increased traction and faster acceleration.
Porsche Stability Management (PSM).
PSM is an automatic control system for maintaining stability at the limits of dynamic driving performance. In addition to the anti-lock braking system (ABS), it includes Electronic Stability Control (ESC) and Traction Control (TC). Alongside the performance tuning with extremely sensitive and accurate regular systems interventions, the systems can be switched off completely in two stages.
The 718 Spyder shows maximum performance, not only just sprinting from 0 to 62 or more, but also when slowing back down to 0. This is ensured by six-piston aluminium monobloc fixed brake calipers at the front, four-piston aluminium monobloc fixed brake calipers at the rear, calipers in red for greater inherent stability and faster response when applying and releasing the brake, even under extreme loads. The composite brake discs at the front and the rear have a diameter of 380mm and are cross-drilled and internally vented – powerful braking even in adverse weather conditions.
Proven in motorsport: the optionally available
In addition to the regular maintenance as part of the standard maintenance intervals, additional maintenance must be carried out for racing use.
The Sports seats Plus, with their streamlined padding and raised side bolsters, provide optimal hold. The backrest can be adjusted electronically, and the seat height and fore/aft position can be adjusted mechanically. The seat centre is finished with Race-Tex, the 'Spyder' logo is embroidered on the headrests.
The adaptive Sports seats Plus have an electric 18-way-adjustment. The seat height, squab and backrest angle, seat depth, fore/aft adjustment, four-way lumbar support and side bolsters on the seat surface and the backrest can all be individually adjusted. The seat centre is finished with Race-Tex, the 'Spyder' logo is embroidered on the headrests.
The full bucket seats are made of carbon-fibre reinforced plastic (CFRP) with carbon-weave finish. This provides especially good lateral support at minimal weight. The fore/aft adjustment is manual, the height adjustment is electric. The seat centre is finished with Race-Tex, the 'Spyder' logo is embroidered on the headrests.
¹Child seats are not compatible with full bucket seats.
In conjunction with the
¹App usage permitted on private land only. Operation of this product (including the video recording feature in particular) could be prohibited by laws or regulations in specific markets or events. Before any use of this product, please check that this is permitted under local laws and regulations.
Connecting you to your
PCM is your central control centre for audio and communication. It has mobile phone preparation, audio interfaces and a high-resolution 7-inch touchscreen display which can be used to control many of the vehicle functions. In addition, multiple Car Connect Services, such as vehicle positioning via smartphone, are available to you.
Thanks to Real-time Traffic Information you’ll always be on the fastest route. As a component of the navigation and infotainment services, online navigation has the advantage of accessing map material which is updated daily, while at the same time taking into account all the relevant traffic reports in real time. Route planning via
Configure 718 Spyder model.
|Number of cylinders||6 Zahl|
|Power (kW)||309 kW|
|Power (PS)||420 PS|
|RPM point maximum power||7.600 1/min|
|Maximum engine speed||8.000 1/min|
|Max. torque (Manual)||420 Nm|
|Max. torque (PDK)||430 Nm|
|RPM point maximum torque (PDK)||5.500 1/min|
|RPM range maximum torque (Manual)||5.000 - 6.800 1/min|
|Max. output per liter (kW/l)||77,00 kW/l|
|Max. output per liter (PS/l)||105,00 PS/l|
|Top speed (Manual)||301 km/h|
|Top speed (PDK)||300 km/h|
|Acceleration 0 - 60 mph (Manual)||4,2 s|
|Acceleration 0 - 60 mph (PDK)||3,7 s|
|Acceleration 0 - 100 km/h (Manual)||4,4 s|
|Acceleration 0 - 100 km/h (PDK)||3,9 s|
|Acceleration 0 - 160 km/h (Manual)||9,0 s|
|Acceleration 0 - 160 km/h (PDK)||8,5 s|
|Acceleration 0 - 200 km/h (Manual)||13,8 s|
|Acceleration 0 - 200 km/h (PDK)||13,4 s|
|Flexibility (80-120 km/h) (50-75 mph) in 5th gear (Manual)||6,0 s|
|In-gear acceleration (80-120km/h) (50-75 mph) (PDK)||2,5 s|
|1/4 mile (Manual)||12,4 s|
|1/4 mile (PDK)||12,0 s|
|Slope angle, front/rear (steel suspension)||7,3 - 10,8 °|
|Ramp break over angle steel suspension)||10,7 °|
|Max. ground clearance (steel suspension)||83 mm|
|Width (with mirrors)||1.994 mm|
|Turning circle||11,4 m|
|Unladen weight (DIN) (Manual)||1.420 kg|
|Unladen weight (DIN) (PDK)||1.450 kg|
|Unladen weight (EU) (Manual)||1.495 kg|
|Unladen weight (EU) (PDK)||1.525 kg|
|Permissible gross weight (Manual)||1.720 kg|
|Permissible gross weight (PDK)||1.750 kg|
|Maximum load||300 kg|
|Luggage compartment volume, front||150 l|
|Luggage compartment volume, rear V210-1||120 l|
|Fuel tank||64 l|
|Fuel consumption urban (Manual)||15,0 l/100 km|
|Fuel consumption urban (PDK)||13,7 l/100 km|
|Fuel consumption extra-urban (Manual)||8,5 l/100 km|
|Fuel consumption extra-urban (PDK)||8,1 l/100 km|
|Fuel consumption combined (Manual)||10,9 l/100 km|
|Fuel consumption combined (PDK)||10,2 l/100 km|
|CO2 emissions combined (Manual)||249 g/km|
|CO2 emissions combined (PDK)||232 g/km|
|NOx emissions (Manual)||16,9 mg/km|
|NOx emissions (PDK)||10,9 mg/km|
|Manual||from QAR 364,500|
|PDK||from QAR 374,310|
Personalisation & finishing.