With the dynamism typical of
The design.
We asked ourselves one question early on: should a sporty sedan really look like a sedan? The
Bodywork.
Whether
The long wheelbase, shorter overhang at the front and longer overhang at the rear already lend visual dynamism. The prominent sculpting of the side profile creates the customary
The
Silver-coloured elements above the side skirts are visual features of the
The fact that four people can appreciate a sporty yet comfortable drive in the
The fact that stylish design and everyday practicality are not mutually exclusive is demonstrated by the large tailgate and the low loading edge, which makes it easier to integrate more than just everyday things into the
360° Interior.
Highlights.
Discover the Panamera models in detail.
Up to this point you have been given an overview of the highlights of the
Design
View exterior, interior and available wheels.
Open chapterPerformance
Get to know the suspension, brakes and Sport Chrono package.
Open chapterComfort
Discover interior comfort, infotainment and assistance systems.
Open chapterGTS
Performance and driving pleasure enhanced. The
Platinum Edition
Key features and unique design elements. Composed with passion.
Open chapterE-Performance
Learn more about
Design .
With the
Interior.
Typical of
© 2023 Dr. Ing. h.c. F.
* The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures (excluding any
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 5 to 80%, a CCS (combined charging system) fast-charging pedestal with > 270kW and > 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 5%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
A lithium-ion battery is subject to physical and chemical ageing, as well as wear and tear. This reduces the battery capacity, depending on the usage pattern and environmental conditions, resulting in a reduction in range and an increase in charging times as the battery ages. Due to the effect of temperature on battery and charging performance, as well as battery life, please consider the following when parking, driving and charging your car:
· If possible, avoid permanent ambient temperatures of over 30°C, such as prolonged parking in direct sunlight. If you cannot avoid ambient temperatures of over 30°C when stationary, connect the vehicle to the mains supply after use and charge the high-voltage battery with AC (alternating current) to a maximum charge status of 85%.
· If the car is left stationary for more than two weeks, the ambient temperature should, if possible, be between 0°C and 20°C and the battery charge status maintained between 20% and 50% during this time.
· For the shortest possible charging time, a battery temperature of approx. 30°C to 35°C is ideal. If charging the car on a daily basis, the maximum charge status of the high-voltage battery should be set to approx. 80%.
PS (PferdeStärke, German for horsepower) is the standard unit used in the European Union to measure the power output of a motor in ‘metric horsepower’. Published figures should only be used for the purpose of comparison between vehicles. Information provided and images displayed on this website or links from our website may relate to models, performance characteristics, optional extras and features only available in overseas models of the vehicle and must not be relied upon as they may be unavailable in Australia. Please note, product changes may have been made since the production of any content. Please contact an Official
Performance.
Whether you’re behind the wheel or occupying a passenger seat in the front or rear: in a
The chassis of the
The rear-axle steering.
The optional rear-axle steering (standard in the
At high speeds, the system steers the rear wheels in the same direction as that of the front wheels. This virtual extension of the wheelbase increases driving stability. Rear-axle steering makes it clear that there is no contradiction between stability and agility or performance and suitability for everyday use. The result: greater manoeuvrability and driving safety in everyday use – and a significant increase in maximum driving performance.
For over 70 years, we’ve been working on being faster. Even when it comes to slowing down. That's why all models – with the exception of the
Proven in motorsport and installed as standard on the
The Sport Chrono Package including mode switch.
Adrenaline at the push of a button: the Sport Chrono Package offers an even sportier tuning of the chassis, engine and transmission.
With the mode switch on the steering wheel with Sport Response button, you can choose between four driving modes: 'Normal', 'Sport', 'Sport Plus' and 'Individual' – for an even more personalised driving style.
© 2023 Dr. Ing. h.c. F.
* The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures (excluding any
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 5 to 80%, a CCS (combined charging system) fast-charging pedestal with > 270kW and > 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 5%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
A lithium-ion battery is subject to physical and chemical ageing, as well as wear and tear. This reduces the battery capacity, depending on the usage pattern and environmental conditions, resulting in a reduction in range and an increase in charging times as the battery ages. Due to the effect of temperature on battery and charging performance, as well as battery life, please consider the following when parking, driving and charging your car:
· If possible, avoid permanent ambient temperatures of over 30°C, such as prolonged parking in direct sunlight. If you cannot avoid ambient temperatures of over 30°C when stationary, connect the vehicle to the mains supply after use and charge the high-voltage battery with AC (alternating current) to a maximum charge status of 85%.
· If the car is left stationary for more than two weeks, the ambient temperature should, if possible, be between 0°C and 20°C and the battery charge status maintained between 20% and 50% during this time.
· For the shortest possible charging time, a battery temperature of approx. 30°C to 35°C is ideal. If charging the car on a daily basis, the maximum charge status of the high-voltage battery should be set to approx. 80%.
PS (PferdeStärke, German for horsepower) is the standard unit used in the European Union to measure the power output of a motor in ‘metric horsepower’. Published figures should only be used for the purpose of comparison between vehicles. Information provided and images displayed on this website or links from our website may relate to models, performance characteristics, optional extras and features only available in overseas models of the vehicle and must not be relied upon as they may be unavailable in Australia. Please note, product changes may have been made since the production of any content. Please contact an Official
Comfort.
In the driver’s seat, everything is focused on you and your next destination. And how you can get there as sportily as possible. Meanwhile, relaxed serenity reigns in the rear. Thanks to the generous space for family, friends or colleagues. And behind? A large luggage compartment under the wide opening tailgate. Folding rear seat backrests allow larger objects to be transported too. That may not be typical of a sports car, but it is typical of the
The assistance systems.
You know exactly what you want. You have a clear destination in sight. And you're willing to give it your all. But let's be honest: you wouldn't object to a little support on your way.
Traffic Jam Assist.
Traffic Jam Assist eases the burden on the driver when congestion is encountered on major inter-urban roads and motorways.
At speeds of up to approximately 60km/h, the system uses gentle steering inputs to keep the vehicle in the middle of the lane, regulates the distance from vehicles in front and follows the queue ahead where system limitations allow. To do this, Traffic Jam Assist tracks roadway markings and other vehicles on the carriageway. The benefit? Appreciable stress relief and greater comfort on long journeys.
Head-Up Display.
The Head-Up Display is part of the standard equipment for all
The headlights.
The LED main headlights with matrix beam including
Great foresight is achieved with the LED main headlights featuring matrix beam technology. The main headlights with matrix beam strategically deactivate specific segments of the permanent main-beam cone. 84 individually controlled LEDs adapt to the situation ahead by switching off or dimming accordingly. Vehicles in front of you or on the opposite side of the road are dimmed, while the areas in between and next to them are still fully illuminated. To optimise target fixation, not only are the lights selectively dimmed to fade out oncoming vehicles, the area to the right of the light void is lit more brightly for better guidance of the driver's visual attention. Segment-specific dimming of highly reflective traffic signs also acts to avoid driver dazzle. The LED main headlights with matrix beam including PDLS Plus: bright, homogeneous, safe.
Sound systems.
BOSE® Surround Sound System.
The
Burmester ® 3D High-End Surround Sound System.
Quiet, please, as we introduce a total output of 1,455 watts. 21 individually controlled loudspeakers including an active subwoofer with 400-watt class D digital amplifier, two-way centre system and a total diaphragm surface area of more than 2,500cm². The special air motion ribbon tweeters ensure unmistakably fine, clear and undistorted high-frequency sound reproduction with excellent level stability.
Discover more about our Connect services.
© 2023 Dr. Ing. h.c. F.
* The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures (excluding any
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 5 to 80%, a CCS (combined charging system) fast-charging pedestal with > 270kW and > 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 5%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
A lithium-ion battery is subject to physical and chemical ageing, as well as wear and tear. This reduces the battery capacity, depending on the usage pattern and environmental conditions, resulting in a reduction in range and an increase in charging times as the battery ages. Due to the effect of temperature on battery and charging performance, as well as battery life, please consider the following when parking, driving and charging your car:
· If possible, avoid permanent ambient temperatures of over 30°C, such as prolonged parking in direct sunlight. If you cannot avoid ambient temperatures of over 30°C when stationary, connect the vehicle to the mains supply after use and charge the high-voltage battery with AC (alternating current) to a maximum charge status of 85%.
· If the car is left stationary for more than two weeks, the ambient temperature should, if possible, be between 0°C and 20°C and the battery charge status maintained between 20% and 50% during this time.
· For the shortest possible charging time, a battery temperature of approx. 30°C to 35°C is ideal. If charging the car on a daily basis, the maximum charge status of the high-voltage battery should be set to approx. 80%.
PS (PferdeStärke, German for horsepower) is the standard unit used in the European Union to measure the power output of a motor in ‘metric horsepower’. Published figures should only be used for the purpose of comparison between vehicles. Information provided and images displayed on this website or links from our website may relate to models, performance characteristics, optional extras and features only available in overseas models of the vehicle and must not be relied upon as they may be unavailable in Australia. Please note, product changes may have been made since the production of any content. Please contact an Official
The Panamera GTS models.
If you pursue ambitious goals, you have to remain focused. Concentrate on your strengths. Focus on the essentials. Three letters embody this perfectly and, together with the name
The special dynamic of the
'GTS' logos on the front doors round off the overall sporty image.
A special feature that highlights the sports car nature is the naturally aspirated engine character of the 4.0-litre twin-turbo V8 engine with a linear unleashing of power. There is no performance plateau, as is common with turbo engines today. The sports exhaust system with intensive V8 sound characteristics is a perfect match. The same applies to the sports suspension which is lowered by 10mm and has adaptive air suspension and to a more streamlined set-up specially designed for the
The interior of the
© 2023 Dr. Ing. h.c. F.
* The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures (excluding any
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 5 to 80%, a CCS (combined charging system) fast-charging pedestal with > 270kW and > 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 5%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
A lithium-ion battery is subject to physical and chemical ageing, as well as wear and tear. This reduces the battery capacity, depending on the usage pattern and environmental conditions, resulting in a reduction in range and an increase in charging times as the battery ages. Due to the effect of temperature on battery and charging performance, as well as battery life, please consider the following when parking, driving and charging your car:
· If possible, avoid permanent ambient temperatures of over 30°C, such as prolonged parking in direct sunlight. If you cannot avoid ambient temperatures of over 30°C when stationary, connect the vehicle to the mains supply after use and charge the high-voltage battery with AC (alternating current) to a maximum charge status of 85%.
· If the car is left stationary for more than two weeks, the ambient temperature should, if possible, be between 0°C and 20°C and the battery charge status maintained between 20% and 50% during this time.
· For the shortest possible charging time, a battery temperature of approx. 30°C to 35°C is ideal. If charging the car on a daily basis, the maximum charge status of the high-voltage battery should be set to approx. 80%.
PS (PferdeStärke, German for horsepower) is the standard unit used in the European Union to measure the power output of a motor in ‘metric horsepower’. Published figures should only be used for the purpose of comparison between vehicles. Information provided and images displayed on this website or links from our website may relate to models, performance characteristics, optional extras and features only available in overseas models of the vehicle and must not be relied upon as they may be unavailable in Australia. Please note, product changes may have been made since the production of any content. Please contact an Official
Composed with passion.
The
Features.
© 2023 Dr. Ing. h.c. F.
* The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures (excluding any
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 5 to 80%, a CCS (combined charging system) fast-charging pedestal with > 270kW and > 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 5%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
A lithium-ion battery is subject to physical and chemical ageing, as well as wear and tear. This reduces the battery capacity, depending on the usage pattern and environmental conditions, resulting in a reduction in range and an increase in charging times as the battery ages. Due to the effect of temperature on battery and charging performance, as well as battery life, please consider the following when parking, driving and charging your car:
· If possible, avoid permanent ambient temperatures of over 30°C, such as prolonged parking in direct sunlight. If you cannot avoid ambient temperatures of over 30°C when stationary, connect the vehicle to the mains supply after use and charge the high-voltage battery with AC (alternating current) to a maximum charge status of 85%.
· If the car is left stationary for more than two weeks, the ambient temperature should, if possible, be between 0°C and 20°C and the battery charge status maintained between 20% and 50% during this time.
· For the shortest possible charging time, a battery temperature of approx. 30°C to 35°C is ideal. If charging the car on a daily basis, the maximum charge status of the high-voltage battery should be set to approx. 80%.
PS (PferdeStärke, German for horsepower) is the standard unit used in the European Union to measure the power output of a motor in ‘metric horsepower’. Published figures should only be used for the purpose of comparison between vehicles. Information provided and images displayed on this website or links from our website may relate to models, performance characteristics, optional extras and features only available in overseas models of the vehicle and must not be relied upon as they may be unavailable in Australia. Please note, product changes may have been made since the production of any content. Please contact an Official
The Panamera E-Hybrid models.
Top endurance athletes – high-end performance meets comfort. The
The
E-Performance , electromobility and the sports car of the future.
© 2023 Dr. Ing. h.c. F.
* The published consumption (l/100km and Wh/km), emissions (g/km) and kilometre (km) range figures (excluding any
The specified charging outputs and times (hour/minutes) are dependent on various factors: in general, the charging output and time can vary due to physical and chemical limits, depending on factors such as the available output of the country-specific energy infrastructure, the customer's own domestic installation, the temperature, interior pre-conditioning and charging status, as well as the age of the battery. Charging times may therefore be significantly higher than those specified. To achieve the optimum value of the specified DC charging time (DC = direct current) for a charge status increase from 5 to 80%, a CCS (combined charging system) fast-charging pedestal with > 270kW and > 850V is required, as well as a battery temperature of 30°–35°C. The charging status when commencing charging must not exceed 5%. For physical and chemical reasons, the charging speed decreases as the battery approaches its full capacity. Therefore, it usually makes sense to use fast DC charging to charge the battery up to 80% or up to the required range. The predominant use of CCS fast charging pedestals leads to a long-term increase in charging times. For regular fast DC charging, we recommend a maximum charging output of 50kW. When charging in a domestic environment, AC charging (AC = alternating current) is recommended. Using an (AC) industrial electrical outlet will result in improved efficiency and a much shorter charging time compared to using a household socket.
A lithium-ion battery is subject to physical and chemical ageing, as well as wear and tear. This reduces the battery capacity, depending on the usage pattern and environmental conditions, resulting in a reduction in range and an increase in charging times as the battery ages. Due to the effect of temperature on battery and charging performance, as well as battery life, please consider the following when parking, driving and charging your car:
· If possible, avoid permanent ambient temperatures of over 30°C, such as prolonged parking in direct sunlight. If you cannot avoid ambient temperatures of over 30°C when stationary, connect the vehicle to the mains supply after use and charge the high-voltage battery with AC (alternating current) to a maximum charge status of 85%.
· If the car is left stationary for more than two weeks, the ambient temperature should, if possible, be between 0°C and 20°C and the battery charge status maintained between 20% and 50% during this time.
· For the shortest possible charging time, a battery temperature of approx. 30°C to 35°C is ideal. If charging the car on a daily basis, the maximum charge status of the high-voltage battery should be set to approx. 80%.
PS (PferdeStärke, German for horsepower) is the standard unit used in the European Union to measure the power output of a motor in ‘metric horsepower’. Published figures should only be used for the purpose of comparison between vehicles. Information provided and images displayed on this website or links from our website may relate to models, performance characteristics, optional extras and features only available in overseas models of the vehicle and must not be relied upon as they may be unavailable in Australia. Please note, product changes may have been made since the production of any content. Please contact an Official
Select and configure Panamera models.
| Number of cylinders | 6 |
| Bore | 84.5 mm |
| Stroke | 86.0 mm |
| Displacement | 2,894 cm³ |
| Power (kW) | 243 kW |
| Power (PS) | 330 PS |
| Maximum engine speed | 6,800 1/min |
| Max. torque | 450 Nm |
| Power Electric Motor (kW) | 100 kW |
| Power Electric Motor (PS) | 136 PS |
| Torque Electric Motor | 400 Nm |
| Power combined (kW) | 340 kW |
| Power combined (PS) | 462 PS |
| Torque combined | 700 Nm |
| Max. output per liter (kW/l) | 83.97 kW/l |
| Max. output per liter (PS/l) | 114.03 PS/l |
| Electric range combined (ECE) *See below | 56 km |
| Electrical top speed | 140 km/h |
| Top speed | 280 km/h |
| Acceleration 0 - 100 km/h with Sport Chrono Package | 4.4 s |
| Acceleration 0 - 160 km/h with Sport Chrono Package | 10.5 s |
| Acceleration 0 - 200 km/h with Sport Chrono Package | 16.7 s |
| In-gear acceleration (80-120km/h) (50-75 mph) with Sport Chrono Package | 3.0 s |
| 1/4 mile with Sport Chrono Package | 12.7 s |
| Max. ground clearance air suspension (normal ride height) | 133 mm |
| Length | 5,049 mm |
| Width | 1,937 mm |
| Width (with mirrors) | 2,165 mm |
| Height | 1,423 mm |
| Wheelbase | 2,950 mm |
| Turning circle | 11.9 m |
| Unladen weight (DIN) | 2210 kg |
| Permissible gross weight | 2710 kg |
| Maximum load | 500 kg |
|
Maximum permissible roof load with |
75 kg |
| Open luggage compartment volume (up to the upper edge of the rear seats) | 403 l |
| Largest luggage compartment volume (behind front seats, up to roof) | 1,242 l |
| Fuel tank | 80 l |
| Warranty period | 3 years |
| Main service interval | 15,000 km / 1 year |
| Paint warranty period | 3 years |
| Rust warranty | 12 years |
| High-voltage battery warranty period | 160,000 km / 8 years |
| Fuel consumption combined *See below | 2.6 l/100 km |
| CO2 emissions combined *See below | 59 g/km |
| Electrical consumption combined *See below | 195.3 Wh/km |
| PDK | Build & Price |
Gallery.
Personalisation & finishing.
In the
Contact.
Contact your authorised